
ABB electrical accessory A 2TLA020051R5100
- BrandABB
- SeriesA
- Sensor length12 mm
- Guaranteed operating shutoff distance25 mm
- Guaranteed operating switching distance10 mm
- Maximum output current at protected output50 µA
- Operating distance15 mm

Eden is a non-contact safety sensor used as interlocking device for e.g. doors and safe position monitoring. Adam safety sensor with DYNlink signal and inform
| Series | A |
|---|---|
| Electrical | |
| Guaranteed operating shutoff distance | 25 mm |
| Guaranteed operating switching distance | 10 mm |
| Maximum output current at protected output | 50 µA |
| Rated DC supply voltage | 24 V |
| Current type | DC |
| Connection type | Connector M12 |
| With monitoring function for connected devices | No |
| Mechanical | |
| Sensor length | 12 mm |
| Sensor width | 30 mm |
| Sensor height | 75.2 mm |
| Housing construction | Cuboid |
| Housing material | Plastic |
| Housing coating | Uncoated |
| Mechanical installation requirement for sensor | Not flat |
| Operating conditions | |
| Operating temperature | -40–70 °C |
| Gas explosion protection category (EU ATEX directives) | None |
| Dust explosion protection category (EU ATEX Directive) | None |
| IP protection rating | IP67 |
| Other | |
| Operating distance | 15 mm |
| Certified per IEC 61508 | 3 |
| Number of safe semiconductor outputs with signaling function | 1 |
| Cross/short circuit detection possible | Yes |
| Suitable for security systems | Yes |
| Performance level per EN ISO 13849-1 | Level e |
| Actuation method | Transponder |
| With status indication | Yes |
We use cookies to ensure the website works properly and to give you a better experience. Privacy Policy