
ABB isolating switch OT2000 1SCA103915R1001
- BrandABB
- SeriesOT2000
- Depth335 mm
- Maximum rated operational voltage Ue AC1 kV
- Ingress protection (NEMA)1 s
- Width538 mm
- Height377 mm

2000A, 3 pole manual change-over switch including a black plastic IP65 I-0-II pistol type handle (see the table below), shaft and bolt set for the cable connect
| Series | OT2000 |
|---|---|
| Electrical | |
| Maximum rated operational voltage Ue AC | 1 kV |
| Rated voltage | 1 kV |
| Rated short-time withstand current Icw | 55 kA |
| Number of poles | 3 |
| Number of switches/changeover switches | 1 |
| Independent trip unit | No |
| Main electrical circuit connection type | Screw connection |
| Version as emergency switching-off device | No |
| Version as main switch | Yes |
| Design as protective switch | No |
| Design as auxiliary/maintenance switch | Yes |
| Mechanical | |
| Depth | 335 mm |
| Width | 538 mm |
| Height | 377 mm |
| Colour of control elements | Black |
| Housing color | Grey |
| Housing material | Plastic |
| Suitable for central front panel mounting | No |
| Suitable for intermediate mounting | No |
| Suitable for front panel mounting, 4 holes | Yes |
| Operating conditions | |
| Ingress protection (NEMA) | 1 s |
| IP protection rating | IP20 |
| Other | |
| Design | Built-in device plug-in technique |
| Reversing design | No |
| Motor drive optional | No |
| Suitable for distribution board | Yes |
| Type designation | OT2000E12CP |
| Built-in motor drive | No |
| With interlock | Yes |
We use cookies to ensure the website works properly and to give you a better experience. Privacy Policy