Legrand DPX moulded case circuit breaker 3P, 1250 A, 100 kA, with measurement, electronic trip unit, reference 422993. A moulded case circuit breaker is used to switch distribution circuits and protect them against overloads and short circuits. Main parameters: rated current In 1250 A; number of poles 3; breaking capacity Icu 100 kA; overload release setting range 250…1250 A; short-circuit release setting range 15.000 A; voltage type AC; width 210 mm, height 320 mm, depth 215 mm. Design: with trip indicator, with integrated undervoltage release, supplied with protection device.
Technical data
Series
DPX 250 1600
Ultimate breaking capacity Icu
100 kA
Depth
215 mm
Rated current In
1250 A
Width
210 mm
Height
320 mm
Battery or accumulator
Battery
Battery weight (g) for Type 1
1.1
Device design
Permanently installed device
For TH rail mounting
No
Supply direction
From top or bottom
Colour
Grey
Number of batteries
1
Number of poles
3
Number of auxiliary changeover contacts
3
Labelling area
Yes
RAL number
7035
Type 1 number
2
Optional DIN (TH) rail mounting
No
Optional motor operator
Yes
IEC designation
CR1616
Terminal marking
No
Terminal cross-section (min-max)
120-800 mm²
Actuator type
Switch
Connection cable type
Rigid
Voltage type
AC
Main contact connection type
Screw connection
Battery type/technology
Lithium
Degree of protection (IP)
IP30
Storage temperature (min-max)
-40-85 °C
Total weight of the batteries (Type 1)
2.2
Type 1 location
Product contains a battery
Main circuit terminal location
Front
Supplied with protection device
Yes
Integrated motor operator
No
Frequency range (min-max)
50-60 Hz
Rated voltage range (min-max)
220-690 V
Short-time delay release setting range (min-max)
1875-12500 A
Overload release setting range (min-max)
250-1250 A
Short-circuit release setting range (min-max)
15.000-15.000 A
Operating temperature range (min-max)
-5-70 °C
Contains battery and/or accumulator
Yes
With trip indicator
Yes
With integrated undervoltage release
Yes
Integrated earth fault protection
No
Rated short-circuit breaking capacity Icu at 400 V, 50 Hz
100 kA
Rated uninterrupted current Iu
1250 A
Technical data according to the manufacturer's documentation.