Power circuit-breaker for trafo/generator/installation protection ABB 1SDA125557R1: number of auxiliary changeover contacts 4, number of poles 3. This open power circuit-breaker series is based on a proven design family and serves to protect installations and disconnect circuits to EN standards. Power circuit breaker for protecting and switching power circuits in low-voltage switchboards. Degree of protection IP30.
| Series | E6.3H 6300 Ekip Aware LSI 3p WMP |
|---|---|
| Electrical | |
| Power loss | 1.55 kW |
| Short-time delayed short-circuit release range | 3.78–63 kA |
| Rated ultimate short-circuit breaking capacity Icu at 400 V, 50 Hz | 100 kA |
| Rated voltage | 690 V |
| Rated continuous current Iu | 6.3 kA |
| Number of poles | 3 |
| Number of auxiliary changeover contacts | 4 |
| Main circuit connection type | Connection at separate chassis part |
| Main electrical circuit connection type | Connection at separate chassis part |
| With built-in undervoltage release | No |
| Mechanical | |
| DIN rail mounting (O-type) optional | No |
| Suitable for DIN-rail mounting | No |
| Operating conditions | |
| IP protection rating | IP30 |
| Other | |
| Setting range of overload protection device | 2.52–6.3 kA |
| Instantaneous short-circuit release setting range | 9.45–94.5 kA |
| Complete device with protection block | Yes |
| Design | Built-in device slide-in technique (withdrawable) |
| Motor drive optional | Yes |
| Trip indicator present | Yes |
| Control element type | Push button |
| Built-in ground fault protection | No |
| Built-in motor drive | No |
We use cookies to ensure the website works properly and to give you a better experience. Privacy Policy
